ICS Solo 3 Forensic

The Solo 3 Forensic unit is a high speed hard drive duplication unit that makes forensically sound copies of a hard drive. The purpose of these units is to allow investigators to quickly capture data from hard drives or flashcards to another drive (evidence drive). The evidence drive will then be used for running the analysis.

The Solo 3 Forensic unit is an all encompassing unit when it comes to hard drive acquisition, allowing you to capture IDE 3.5 and 2.5" drives, SATA drives, and SCSI drives.

The Solo 3 Forensic unit has a built in drivelock on the suspect side to prevent unwanted writes to the original drive which maintains the integrity of the evidence. MD5 hashing is also included which assures an exact copy of the suspect drive. The unit generates an audit trail showing the process, settings, and hash values. All of these features guarantee that the unit has a forensically sound copy of the original drive.

Product Features
  • Suspect's data can be seized at speeds exceeding three gigabytes per minute. Using the unit's on the fly hashing capabilities, the transferred data can be guaranteed to be an exact replica of the Suspect's data without modification, rearrangement or corruption. The Suspect's data can be seized using the unit's direct drive to drive interface or using the unit's external Firewire/USB interface to seize data from a Suspect's unopened PC. The IMSOLO-III Forensics unit supports seizing from IDE, Serial ATA and SCSI hard disk drives, including ATA compatible solid state devices. The unit's advanced touch screen user interface provides ease of use.
  • MD5 and CRC32 Hashing: Simultaneous MD5 and CRC32 hashing generation can be performed during the data capture.
  • Touch Screen User Interface: The unit's advanced Touch Screen User Interface and programmed keyboard provides for ease of use.
  • High Speed Operation: Data transfer rates can exceed 3GB/min.
  • Built in Write Protection: Suspect's data is protected with built-in write protection.
  • Built in FireWire 1384B and USB 2.0 Interface: Seize data from a Suspect's unopened Notebook or PC. Also, safely preview the Suspect's drive while connected to the IMSolo III write protected port.
  • Captures to Two Evidence Drives Simultaneously: Seize data to two hard drives simultaneously at high speeds, without speed reduction.
  • Multiple Capture Methods: Seize in a Forensic sector-by-sector format method or using a segmented file format method (Linux-DD) which allows seizing multiple images to one Evidence drive.
  • WipeOut: Sanitize drives at speeds greater than 3GB/min.
  • Biometric Security: This Option uses fingerprint recognition to ensure that only qualified and authorized users are allowed to operate the IMSolo III Forensics unit.
  • Audit Trail and Logs: Detail operational event log information can be printed or save to Compact Flash.
  • Multiple Media Support: Supports data transfer between P-ATA, S-ATA and SCSI hard disk drives. Also supports flash media devices and Notebook drives.
  • Upgradable: Software and Firmware upgrades performed using the supplied Compact Flash Card.

    FDR Training Schedule